Trial / Demo
CIBSE Loads: Get a Conduction Load Breakdown
When you run CIBSE Loads no detailed breakdown of surface conduction gains/losses is output.
The cooling loads file will give an overall conduction gain value for the room (conduction gain room variable)
The heating loads file will break down external and internal into the room variables external conduction gain and internal conduction gain
There is no further breakdown of conduction gains when running a loads analysis. It's only available at room level. However, if you run a dynamic simulation you can turn on conduction gains breakdown in the simulation output options.
See also...
24246
products
Capella Building,
7th Floor,
60 York Street,
Glasgow,
G2 8JX,
UK
Tel:
+44 (0) 141 945 8500
Email:
enquiries@iesve.com
© 2011-
2025
Integrated Environmental Solutions Limited. All rights reserved |
Legal